VS Code + Threads

Threads posts with VS Code and Bolta

Draft and queue social posts from VS Code's AI chat. Parts of the VS Code route are not confirmed yet, and the note below says which. Nothing goes live on Threads until you say yes.

Add one small JSON file with the Bolta server address. Sign in from the browser if VS Code offers it. Otherwise use a Bolta API key.

VS CodeBolta connected
You

Read the top entry in CHANGELOG.md and draft a Threads post about it under 500 characters

Illustration of the reply: Bolta returns a draft showing the connected account and the scheduled time, with Approve, Edit and Reject actions.

Illustration. Your drafts show your real text, account and time.

What is and is not confirmed

Read this before you set up VS Code

  • The config and sign-in steps follow Bolta's own guide and VS Code's MCP format. Nobody has run a full draft, review and schedule through VS Code yet.
  • Menu names and file locations change between VS Code versions, so check VS Code's MCP docs if a label does not match.
  • Bolta's skills repository lists VS Code as not tested.
Bolta on Threads

What Bolta does on Threads

Threads caps a post at 500 characters, and Bolta handles longer text by splitting it into a thread of connected posts, so one long idea does not fail.

  • Text posts, and posts with images.
  • A carousel of 2 to 10 items.
Limits and format

Threads limits and format rules

Network rules last checked 2026-07-28. Bolta's posting rules for your workspace (get-posting-rules) win if they differ from this page.

Not promised for Threads from VS Code: Polls on Threads. Not confirmed for Bolta. Mirroring a Threads post onto Instagram. Threads does not do that on its own, and this page does not confirm that Bolta does it.

Threads limits and format rules
What to knowThreads's own ruleWhat Bolta does
Post lengthA single Threads post is capped at 500 characters, and a reply carries the same limit.Bolta uses 500. Longer text is split into a thread of connected posts.
MediaA post can carry up to 20 photos or videos in one carousel. Video is limited to 5 minutes and 1 GB.A carousel in Bolta takes 2 to 10 items. An image over 8 MB is shrunk if Bolta can.
LinksLinks are allowed, show as a preview card, and are capped at 5 per post.Each Threads link is swapped at publish time for a short Bolta link that counts clicks. If the swap fails, the link goes out as written.
Continuing past the limitYou can continue by replying to your own post, which keeps the follow-on in the same chain.Send a long text as several parts and Bolta posts every part after the first as a reply, which keeps them in one chain.
FormattingNot stated on this page.Plain text only on Threads. Markdown is flattened, and tags and mentions stay as typed.
Best practices

VS Code jobs for Threads, and how to write them

  • Review and approve what Bolta has queued without leaving the editor
  • Write one longer text when you want a thread, and read where it splits before you say yes.
Prompts

Example prompts for Threads

Things to type in VS Code. Each one asks for a draft and shows you the text first.

Read the top entry in CHANGELOG.md and draft a Threads post about it under 500 characters

Show how my last five posts performed and suggest what to post next

Turn the release notes into one longer Threads text that Bolta can split into a thread, and show it to me

Which Bolta brands can you see? List them only and do not change anything

Review

Bolta saves a draft, you read the exact text, you say yes

  1. 01

    Bolta saves a draft

    VS Code asks Bolta for the Threads post in your brand voice (save-post). A saved draft is never public.

  2. 02

    You read the exact text

    On Threads the exact text includes where a long text is split into a thread and the topic tag, so read each part in order.

  3. 03

    You say yes

    Only then does Bolta schedule or publish (publish-post), in your workspace's timezone. Safe Mode, client sign-off and brand approval rules still apply.

VS Code and Bolta

Using VS Code for Threads

Parts of this route are not confirmed. The note above says which.

For Threads, VS Code, from Microsoft, reaches Bolta through Remote MCP server in mcp.json (Streamable HTTP). Sign-in: Sign in from the browser, or API key as a Bearer header. The Threads account itself is connected inside Bolta, not in VS Code.

VS Code adds Bolta through a small .vscode/mcp.json file, with a browser sign-in if it offers one and an API key otherwise. You ask for Threads drafts in its AI chat.

An illustration from the VS Code guide, not real output. You ask: Show how my last five posts performed and suggest what to post next The reply goes along these lines: Here is what Bolta's analytics show for those posts, and two ideas that follow from what did better. Read only.

The Bolta entry is small: a key named bolta, a type of http and the address https://mcp.bolta.ai/mcp, all under a top-level servers key. In VS Code, http means Streamable HTTP, which is what Bolta speaks.

Give it only the permissions you need. A key without posts:write cannot save posts.

  • Drafts from what you just shipped. Point the chat at a changelog entry, README section or commit notes. It saves a draft in your voice and shows it to you.
  • Routines that repeat. Plan a weekly update and confirm it before it is saved. A routine lives in Bolta, and switching it on is a separate yes.
  • It finds your brand. The chat asks Bolta which brands the connection can reach, so a draft lands under the right one.
  • It reads your voice. Before writing, it pulls your saved voice and brand context so the draft sounds like you and not like release notes.
  • Setup: Check that VS Code can use MCP servers. Use a recent version of VS Code with its AI chat switched on. A workplace policy can limit MCP servers, so ask your admin if the option is missing. Menu names and file locations change between versions, so check VS Code's own MCP docs if a label here does not match.
  • Setup: Start the server and sign in. Save the file, then run MCP: List Servers from the Command Palette and start Bolta if it is stopped. If VS Code offers sign-in for remote servers, a browser window opens on Bolta. Sign in and tick the brands this app may reach. If there is no sign-in, create an API key in Bolta under Settings, API Keys, and have VS Code prompt for it as a Bearer header so it never sits in the file. Keep keys out of git.
  • Skill via npx skills add. npx skills add boltaai/bolta-skills --skill bolta, or copy skills/bolta by hand. Bolta's skills repository lists VS Code as not tested.
  • Nothing new is drafted by the chat itself. Asking for a draft needs VS Code open with the Bolta server running.
Connect

Connect VS Code to Bolta

Add one small JSON file with the Bolta server address. Sign in from the browser if VS Code offers it. Otherwise use a Bolta API key.

FAQ

Threads questions, answered for VS Code

What does Bolta do when VS Code writes more than 500 characters for Threads?
Bolta splits longer text into a thread of connected posts, and the 500 limit also applies to each image caption. The parts are posted as replies in order, so read where the splits fall before you say yes.
Can VS Code reply to someone else's Threads post?
Yes, from a public link (reply-to-social-content). The agent writes the text first with the voice-aware draft tool (draft-engagement-reply) (for a stored opportunity) or (draft-inbound-reply) (for a comment on your own post), shows it to you, and calls reply-to-social-content only after your yes, because that call posts the reply. Finding conversations to join (search-engagement-opportunities) needs a campaign already attached to the account.
Will it work in other apps?
Likely, if the app can talk to an MCP server over HTTP. The address is the same, but each app names its config keys differently (url, serverUrl or httpUrl), so check that app's docs. We have not tested every app.
What can it not do?
Its reach is capped by your Bolta role, and a viewer connection is read-only. In some apps batch approval and campaign setup from chat are not offered, so it works one post at a time and links you to Bolta. It also cannot post to a social account you have not connected in Bolta.
Where does the Bolta config file go in VS Code?
For one project it is .vscode/mcp.json inside the project folder, with a top-level servers key. VS Code's guided MCP: Add Server command can also write it for you. Newer VS Code versions may point new setups at other locations, so check VS Code's MCP docs if the file seems ignored.
Do I need the Bolta skill as well?
It is optional but useful. Run npx skills add boltaai/bolta-skills --skill bolta, or copy the skills/bolta folder from the bolta-skills repository to where your app reads skills. The skill teaches the chat to draft in your voice and to ask before anything is approved. Node.js is needed for the command.
Does VS Code publish Threads posts without my yes?
No. Nothing is approved, scheduled or published until you say yes to that Threads post. Whether VS Code completes the connection is not fully confirmed, so read the note above first.

More from VS Code

VS Code can work with the other networks Bolta publishes to. Each page has its own limits and review notes.

Threads from other AI agents

The same Threads limits apply whichever agent asks. The connection and the setup are what change.

Try a Threads draft from VS Code

Connect VS Code, ask for a Threads draft and read the exact text. Nothing goes live until you say yes.