NanoClaw + WordPress

WordPress posts with NanoClaw and Bolta

Draft social posts from a chat app, with each brand in its own container. Parts of the NanoClaw route are not confirmed yet, and the note below says which. Nothing goes live on WordPress until you say yes.

NanoClaw runs on your own hardware, so you add the server address https://mcp.bolta.ai/mcp on that machine.

NanoClawBolta connected
You

Write a WordPress blog post about our spring launch with a title, excerpt and tags, and save it as a draft for review

Illustration of the reply: Bolta returns a draft showing the connected account and the scheduled time, with Approve, Edit and Reject actions.

Illustration. Your drafts show your real text, account and time.

What is and is not confirmed

Read this before you set up NanoClaw

  • Confirmed from NanoClaw's official docs: you can add a remote Streamable HTTP MCP server to an agent group with ncl groups config add-mcp-server --id <group-id> --name <name> --url <https url>. The URL must be HTTPS and cannot carry credentials, which https://mcp.bolta.ai/mcp satisfies.
  • Confirmed from the docs: --headers is for non-secret values only, and real credentials belong in the credential gateway vault (OneCLI Agent Vault by default), which injects them in flight. The docs also say not to put a raw key in --env.
  • Not confirmed: the exact vault command for storing a Bolta key, and a worked example of the vault injecting a Bearer bolta_sk_ key for a custom MCP host. This page does not write out a one-line Authorization header, because none is documented.
  • Not confirmed: whether NanoClaw's remote MCP servers support OAuth sign-in, and whether Bolta's skill works inside its agent containers. Neither has been run end to end.
  • Whatever works on the NanoClaw side, Bolta does not change: nothing is approved, scheduled or published until you say yes.
Bolta on WordPress

What Bolta does on WordPress

WordPress is a blog, not a social network, so Bolta has its own tool for it (create-wordpress-blog-post). It resolves the WordPress account, creates the draft and sets the article's settings in one call.

  • Articles saved as a draft, with a title, excerpt, categories, tags and SEO meta.
  • Featured and inline images, uploaded to the WordPress Media Library.
Limits and format

WordPress limits and format rules

Bolta's posting rules for your workspace (get-posting-rules) win if they differ from this page.

Not promised for WordPress from NanoClaw: Pages and custom post types. This page does not confirm them. Rankings. Bolta prepares an article for search and never promises a position.

WordPress limits and format rules
What to knowThe destination's ruleWhat Bolta does
TitleNot stated on this page.The title you set. If you do not set one, Bolta uses the first line of the post text.
StatusNot stated on this page.WordPress has its own status field, which is separate. Bolta's own approval decides when the article goes out.
Several sitesNot stated on this page.With more than one WordPress account, Bolta returns a list and asks which one to use.
LengthNot stated on this page.No limit that Bolta checks.
FormattingNot stated on this page.Markdown is shown as formatting, so headings, lists and links work.
Best practices

NanoClaw jobs for WordPress, and how to write them

  • Ask for last month's post results in chat before you plan the next batch
  • Name the site if you have more than one. Bolta asks when you do not.
Prompts

Example prompts for WordPress

Things to type in NanoClaw. Each one asks for a draft and shows you the text first.

Write a WordPress blog post about our spring launch with a title, excerpt and tags, and save it as a draft for review

What is waiting for my approval in Bolta?

Draft a WordPress article from this outline and show me the full text before saving

List my Bolta workspaces and the accounts on each one

Review

Bolta saves a draft, you read the exact text, you say yes

  1. 01

    Bolta saves a draft

    NanoClaw asks Bolta for the WordPress article in your brand voice (save-post). A saved draft is never public.

  2. 02

    You read the exact text

    On WordPress the exact text is the whole article, with its title, excerpt, tags, meta description and images, so read all of it.

  3. 03

    You say yes

    Only then does Bolta schedule or publish (publish-post), in your workspace's timezone. Safe Mode, client sign-off and brand approval rules still apply.

NanoClaw and Bolta

Using NanoClaw for WordPress

Parts of this route are not confirmed. The note above says which.

For WordPress, NanoClaw, from NanoClaw (open source, MIT licence), reaches Bolta through Remote MCP server added to an agent group with ncl. Sign-in: API key held in NanoClaw's credential vault (OAuth not confirmed). The WordPress account itself is connected inside Bolta, not in NanoClaw.

NanoClaw runs on your own hardware and is messaged from chat apps, so you can say 'draft this week's WordPress posts' there. Its docs say real credentials belong in a vault, so the agent itself does not hold the Bolta key.

This connection uses a Bolta API key, which acts as you. Safe Mode and client sign-off still apply to every WordPress article it saves, so keep them on.

An illustration from the NanoClaw guide, not real output. You ask: Rewrite the draft you just saved so it opens with the question. The reply goes along these lines: I will change the draft text and leave it waiting. I will not approve, schedule or publish it. Draft updated. Waits for your yes.

NanoClaw is an open-source, MIT-licensed assistant you host yourself. You message it from a chat app and it runs your request. Each agent group runs in its own isolated containers.

Write the request the way you would to an assistant, and name the brand. The agent saves a draft in Bolta and quotes the text back, so you can read it where you asked.

A yes in chat covers the one post you were shown. A different post, or a repeating routine, needs its own yes.

  • Review queue from chat. Ask what is waiting and the agent reads your inbox. Sending drafts to review or approving them happens only after you say yes for that task.
  • One brand per agent group. Each group runs in its own containers with its own memory, and you can name the workspace in every request so drafts do not cross brands.
  • It checks which brand you mean. The agent lists your workspaces so a draft for one brand is not written under another. If you have several, it asks before going further.
  • It saves the draft, nothing more. The text is stored in Bolta as a draft. It is not approved, not scheduled and not published.
  • Setup: Connect your social accounts in Bolta. Open Bolta and connect the networks you post to. Without them the agent has nothing to post to, and it will tell you so instead of guessing.
  • Setup: Create a Bolta API key. In Bolta, open Settings, then API Keys, and create a key that starts with bolta_sk_. Pick the brand it is for and give it only the permissions you need.
  • Bolta REST API. Bolta has a public API, but nobody has wired it into a NanoClaw group and checked it. The MCP route is the one this page follows.
  • The agent group and its scheduled chat jobs keep running only while the host machine is up and its containers are running.
  • Bolta skill in a coding harness. Optional, and unconfirmed inside NanoClaw. NanoClaw documents skills as SKILL.md workflows for the host and container skills that mount read-only. An npx skills install path is not documented there, so treat the Bolta skill as an extra, not the way in.
Connect

Connect NanoClaw to Bolta

NanoClaw runs on your own hardware, so you add the server address https://mcp.bolta.ai/mcp on that machine.

FAQ

WordPress questions, answered for NanoClaw

Will NanoClaw publish a WordPress article without asking me?
No. Bolta saves the article as a draft. It can submit for review, schedule or publish, but only after you have seen the exact text and said yes.
What does SERP-ready mean for an article from NanoClaw?
It means Bolta prepared the article technically and editorially, with headings, a meta title and description, and the focus keyphrase placed sensibly. It does not promise a ranking.
How do I add Bolta to NanoClaw?
On the host machine, run ncl groups config add-mcp-server --id <group-id> --name bolta --url https://mcp.bolta.ai/mcp, then ncl groups restart --id <group-id>. Add your Bolta key through NanoClaw's credential vault, not in that command.
How do I restart the agent after adding the server?
Run ncl groups restart --id <group-id> on the host. Otherwise the change applies the next time the container spawns.
Is this a verified setup?
Partly. The ncl command, restart and HTTPS rule come from NanoClaw's official docs. The vault step for a Bolta key and OAuth support have not been run end to end, which is why this page shows a caveat.
The server loads but Bolta calls fail with an authorization error
The key is probably not reaching Bolta. Check it starts with bolta_sk_, has the permissions you need, and that the vault is set to inject it for this host. This page cannot confirm the vault steps, so use NanoClaw's own vault docs.
Does NanoClaw publish WordPress articles without my yes?
No. Nothing is approved, scheduled or published until you say yes to that WordPress article. Whether NanoClaw completes the connection is not fully confirmed, so read the note above first.

More from NanoClaw

NanoClaw can work with the other networks Bolta publishes to. Each page has its own limits and review notes.

WordPress from other AI agents

The same WordPress limits apply whichever agent asks. The connection and the setup are what change.

Try a WordPress draft from NanoClaw

Connect NanoClaw, ask for a WordPress draft and read the exact text. Nothing goes live until you say yes.